Ionization Sensors are designed to detect fires with large open fire with a small amount of smoke. They are equipped with two metal plates and a small amount of radioactive material to ionize the air. When the smoke passes through the device, it interrupts the ionization and causes anxiety.
While the fire detector, in addition to the sensor itself, will include other elements, the number and composition of which depends on the specific model detectors. Thus, the design of the fire detector can include elements of signal recognition, exchange of information with other elements of automatic fire extinguishing system, re-inclusion system and other elements.
Dual-Mode detectors are capable of transmitting two signals - "Fire" and "No Fire". At first glance, the signal "No fire" seems superfluous, because the absence of the signal "Fire" just shows that there is no fire. But It is only at first sight. The "No Fire" Signal indicates that the detector is healthy and "keeps track" of the situation. While the malfunction of a single-mode detector indicating that there is no fire, the total absence of a signal, it is possible to learn only in the course of the check, which nobody will arrange every day. Or when the irreparable happens. That is why the two-mode detectors are completely superseded by one-mode.
Fire alarm system. By building a private network system, and adoption methods. Multiple levels of supply and monitoring process. Saving lives is the first consideration when fire broke out inside the buildings, so it requires notification of the fire, the main task of any alarm system is to register and discover the fire.
Modern Thermal sensors can also contain melting elements, but more often use other principles, in particular thermoelectric effect, arising at a certain temperature at the junction of two different conductors (so-called thermocouple). This principle Was based on the most common sensors installed in the multi-storey. Many certainly remember plastic caps, covering the section of the wire.
Ionization Sensors are designed to detect fires with large open fire with a small amount of smoke. They are equipped with two metal plates and a small amount of radioactive material to ionize the air. When the smoke passes through the device, it interrupts the ionization and causes anxiety.
Wired Smoke detectors will connect to your home's electrical system. Most of them have built-in rechargeable batteries to prevent the device from shutting down. Wired smoke detectors are an extremely reliable option because the chances of tripping are very low. Although they require more knowledge when installing.