Metal Detector RD 312
An easy-to-use metal detector of industrial purpose in a shock-resistant and waterproof case. It is intended for search of medium and large metal and plastic objects. Facilitates the work of communal services (utilities) and road builders. The weight of the device is only 1 kg., works without podzarjadkei up to 30 hours. With detector you can work even in the rain, it is not afraid of moisture and falls from a small height. Operating temperatures from-15 ° C to + 50 °c.
The search plate is waterproof, which allows you to search under a small layer of water. For the convenience of using the locator, adjust the position of its rod to the height, unscrewing the nut, blocking it, about 1/2 rpm.
Turn on the locator: Press the green button and hold it in this position until the locator emits the characteristic sounds of the tick.
Search: To set the maximum sensitivity, release the locator from the metal objects and briefly press the green button. Inspect the surface by moving the locator from side to side so that its search head is about 5 cm away from the ground. A high level of latitude response indicates the presence of a metal cover, hatch, etc. If the locator's response is in a large area, press the green button briefly to reduce the sensitivity while within this response area. Locator. Press the red button to turn off the locator. The automatic system will disable the locator if it is inadvertently left in the enabled state.
Battery Replacement: The locator battery is replaced when the device is switched off or has low sensitivity.
Features of detector
:
-The presence of only two buttons: On/adjustment and off
-Automatic adjustment of the sensitivity level
-Modern noise reduction technology simplifies search
-The search plate is waterproof, which allows you to search under a small layer of water.
